-40%

6.5L Vacuum Hand Operate Engine Oil Changer Fluid Extractor Evacuator Pump Tank

$ 83.95

Availability: 88 in stock
  • Country/Region of Manufacture: China
  • Condition: New
  • Warranty: 3 Year
  • Type: Extraction Pump
  • Technology: Manual
  • Brand: ATUOOL
  • Capacity: 6.5L

    Description

    6.5L Vacuum Hand Operate Engine Oil Changer Fluid Extractor Evacuator Pump Tank
    Description:
    2 WAY USAGE: Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.
    With AUTOOL  6.5L oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport.
    Equipped with 2 sizes of extra-long pipes with different diameters, which can suck deep into the bottom of the storage tank. The transparent hose allows visual inspection of fluid extraction. Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car within a few minutes in pneumatic mode.
    Wide Application: Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc.
    *Note:
    Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor.
    Operation Steps:
    Step 1:  Preparatory Work
    Working temperature between 35°F-175° F. To make the extraction job smooth and easy, evacuate the oil while it is warm.
    Step 2: Install The Tube
    Remove the oil dipstick and insert the connected tube into the dipstick pipe until it reaches the bottom of the oil pan.
    Step 3: Extract Oil
    Pneumatic: Connect the 1/4" NPT quick coupler to the air compressor. Set the the operating pressure between 40-170 psi.
    Manual: Pump the fluid extractor with your hands. Get the job done anywhere and anytime.
    Make sure the tubes are connected tightly before extracting.
    Step 4: Pour Out The Oil
    Press the decompression valve to release the negative pressure. Remove the hose clockwise.
    Pour out the used fluid to another container and take it to the nearby disposal center for recycling.
    Specification:
    Capacity: 6.5
    ltr
    Vacuum Method: Manual / Pneumatic
    Main Material: ABS with Aluminium inflator.
    Package includes:
    1pc 6.5L manual oil pump
    1Set Tubes
    1pc manual instruction