Swepco 202 MolyXP 75w90 Synthetic Gear Lube 1 Gallon

Description

SWEPCO 202 MolyXP 75w90 Synthetic Gear Lube is a high performance gear oil formulated to deliver unsurpassed, allweather performance. Whether the application calls for protection of heavy over the road trucking or automobiles, SWEPCO’s SyntheonTM synthetic base stock, MolyXP advanced EP additive and proprietary Lubium® II chemistry insure extended drain protection from wear, foaming, overheating, deposits, rust and water contamination. If you want to insure maximum performance, smoother shifting and longer gear box life, choose SWEPCO 202 MolyXP 75w90 Synthetic Gear Lube.
Key Benefits:
Extended life, all weather protection for over-the-road
truck and automobile manual transmissions, transaxles
and differentials requiring API 75w90 service
■ Insures full film lubrication without channeling in cold
weather start up conditions
■ SyntheonTM synthetic base stock blend & Lubium® II
insure proper viscosity over a wide temperature range
■ MolyXP plates gears to protect against friction & wear
■ Improves fuel economy in over-the-road service
■ Controls foaming; lowers operating temperatures
■ Extends oil life as much as two to three times or more
■ Controls deposits, varnish, corrosion, sludge, rust
■ Exceeds performance requirements of Mack Trucks,
Ford, Chrysler, GM, Porsche and all other OEM 75w90
specifications
Typical Physical Characteristics
SAE Gear Oil Grade ..................................................75w90
ISO Viscosity Grade ......................................... ISO 32-220
API Gravity, 60°F .............................................................. 33
Density @60°F, lbs/gal (kg/l) ........................... 7.21 (0.865)
Flash point, COC, °F (°C) .................................... 410 (210)
Viscosity, 40°C, cSt ..................................................... 81.33
Viscosity 100°C, cSt ................................................... 14.76
Pour Point, °F (°C) Max .......................................... -49 (-45)
Viscosity Index .............................................................. 191
* Note: SWEPCO 202 is a multi-grade product that has the viscosity of
an SAE 75w (ISO 32) in cold weather start up conditions and the
viscosity of an SAE 90 (ISO 220) once it has reached operating temperatures.
It is intended for applications that require an SAE 75w90 or
a single grade SAE 90 but could benefit from improved cold weather
start up performance. It is not intended to be substituted where OEM
recommendations call for single grade 75w, 80w or 90 weights.
Specifications Exceeded
API GL-5 • API MT-1 • SAE J2360 • Mack Trucks GO-J
• GM 12346140 • Ford M2C-192A • Chrysler MS-8985
• Porsche Transaxle & Manual Transmissions • And all other
OEM 75w90 Service Specifications
Typical Performance Properties
Copper Corrosion, 3 hrs @212°F (ASTM D130) ............ 1a
FZG A/8.3/90°C, min, stage passed (DIN51354) ........ 12+
Timken OK Load, Lbs. (ASTM D2782) ........................... 70
Timken, High speed lbs (Ford BJ1-5) ......................... 12.5
Four-Ball Wear Test (ASTM D4172)
Avg Friction Coefficient ........................................ 0.082
Avg Scar Diameter, mm .......................................... 0.28
Load Carrying, High Speed Shock Loading (ASTM L-42)
% Gear Tooth Scoring
Ring Drive ........................................................................ 0
Ring Coast ....................................................................... 9
Pinion Drive ..................................................................... 0
Pinion Coast .................................................................. 12
Gear Test (ASTM STP 512) .. No rippling, ridging or pitting
Thermal Durability@ 325°F. (Stressed ASTM L-37)
Ridging, Spalling, Varnish ........................................None
Chemical Corrosion, Axle/Trans (BT-10) Wgt Loss, mg.
Steel/Aluminum/Brass ...................................... 0.2/0.9/0.9
Thermal Oxidation Stability Test
Pentane Insoluble, % Wgt (FTM 2504) ................... 0.08
Benzene Insoluble, % Wgt (FTM 2504) ................. 0.05
Seal Compatibility - Volume % Change
Nitrile @ 257°F., 168 Hours ............................................. 2
Polyacrylate @ 257°F., 168 Hours ............................... 2.1
Fluroelastomer @ 320°F., 168 Hours .............................. 0
Foam Test (ASTM D892), Sequence I, II, III .............. 0/0/0
Rust-Preventative Test (ASTM D665)
Method A & B ........................................................... Clean
Seven Days Moisture Corrosion (CRC L-33) ............. Pass
Demulsification, 5 min. (ASTM D1401) .................... 40/40/0
Shear Stability (DIN 51382), % viscosity loss
30 passes ....................................................................... 0
250 passes ..................................................................... 3
Sonic Shear (ASTM D5621), % viscosity loss ............... 16
Will combine shipping on multiple purchases
PayPal Preferred for Payment.
Louisiana residence must pay sales Tax.  If you have any questions you can email me through eBay.